Tsugami
M08SY Turn Mill center with Sub Spindle and Y axis ( M08SY ) for completing the workpiece in a single setup.
M08SY
Features
  • Milling tools can be mounted on all the 12 station turret.
  • Process aggregation by the turret with the Y-axis.
  • The main and back spindle are equipped with built in spindle motors for accurate and Powerful milling capability
.
  • Overwhelming cost performance
.
  • Optional interactive programming software on board “MANUAL GUIDE i”.
  • Abnormal load detection function decrease the damage in case of machine crush.
  • Safety setting up by the help of interference prevention function at debug mode.

  • Accurate machining is realized by the thermal distortion compensation function.
Standard Specification M08SY
Max. machinable dia. Φ 280 mm
Main spindle speed 200~4,500 min-1
Back spindle speed 200~4,500 min-1
No. of turret stations 12 station turret
Rapid traverse rate X : 24m/min Y :12m/min Z : 27m/min A : 30m/min
Main Spindle motor 7.5/11 kW
Width x Depth x Height 2,470 x 1,865 x 1,930mm
Weight 5,900 Kg.
Back to Top